玄幻小说改编的电视剧,小说排行榜

MECHANICAL THERMOSTAT

FZK 011

Applicable to: The mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact. Functionality: The temperature setting on the scale equals to the upper switch point, which means that the NC contact opens. The temperature setting minus switch temperature difference (and tolerances) equals to the lower switch point, which means that the NC contact closes.

View product

ELECTRONIC THERMOSTAT

ETR 011

Applicable to: The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both, inductive and resistive loads, via relay with change-over contact. The LED integrated in the adjustment knob is lit when the NC is closed. (e.g. when a connected heater is operating).

View product

ELECTRONIC THERMOSTAT

ET 011 | 24VDC

Applicable to: Electronic thermostat for regulating high performance 24VDC equipment. Heating or cooling appliances as well as signal devices can be switched via the potential free change-over contact. In comparison to mechanical thermostats, the ET 011 has a low hysteresis making the switching point and setting accuracy more precise.

View product

ELECTRONIC THERMOSTAT

ETL 011 | 12 TO 48 VDC

Applicable to: The electronic thermostat registers the surrounding air temperature and can switch a signal current via its internal relay with a potential-free change-over contact. Signal-processing devices can be controlled directly with the ETL 011. In order to control heating and cooling equipment, filter fans and signal devices the switch module SM 010 or a similar device is needed. The LED integrated in the adjustment knob shows the closed status of the contact 1-2. When temperature is rising contact 1-2 opens and the LED turns off. In currentless state (no s

View product

MECHANICAL HYGROSTAT

MFR 012

Applicable to: The electromechanical hygrostat is designed to control enclosure heaters so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion in enclosures with electric/electronic components is effectively prevented.

View product

ELECTRONIC HYGROSTAT

EFL 012 | 12 TO 48 VDC

Applicable to: The electronic hygrostat registers the surrounding relative humidity and can switch a signal current via its internal relay with a potential-free change-over contact. Signal-processing devices can be controlled directly with the EFL 012. In order to control heating and cooling equipment, filter fans and signal devices the switch module SM 010 or a similar device is needed. The LED integrated in the adjustment knob shows the closed status of the contact 1-2. When relative humidity drops contact 1-2 opens and the LED turns off. In currentless state (n

View product

PRODUCT

Product

< STEGO  

< JCA  

< SAN  

< Italcoppie  

< Emas  

< Tuerk-hillinger  

< South Korea KACON  

< New Product  

MECHANICAL THERMOSTAT

ELECTRONIC THERMOSTAT

ELECTRONIC THERMOSTAT

ELECTRONIC THERMOSTAT

MECHANICAL HYGROSTAT

ELECTRONIC HYGROSTAT